Description

Disinfectant Surface Cleaner Mint, 1 L

A product for cleaning and disinfecting surfaces and equipment in healthcare and public facilities, beauty salons, tanning salons, children's educational institutions and care homes, animal breeding and housing facilities and transport vehicles, food and feed production, catering establishments.

Suitable for cleaning and disinfecting sauna facilities.

Suitable for washing and disinfecting dishes in catering establishments.

Suitable for disinfecting eggs in hatchery setters.

The product inactivates bacteria and acts bactericidally against Pseudomonas aeruginosa, Escherichia coli, Enterococcus hirae, Staphylococcus aureus, Salmonella Typhimurium, L. monocytogenes. The product has fungicidal properties against A. niger.

Suitable for use with foam generators.

Suitable for manual washing application.

The product contains surfactants and therefore has good cleaning properties.

A disinfectant not intended for direct human use; a food and feed sector disinfectant and veterinary hygiene disinfectant (product types 2, 3 and 4). For professional users only.

Must not come into direct contact with food and feed.

USE

The product is suitable for disinfecting and cleaning various moisture-resistant surfaces. Depending on the degree of soiling, working dilutions of 0.5-1.5% (5-15g/l water) are used to clean rooms (floors, walls, doors, windowsills), furniture and all other moisture-resistant surfaces.

For disinfection, a spray can be used, or for soft furnishings and small items, a dense sponge or cloth. First mechanically remove dirt from the surface to be disinfected. Spray the solution onto the surface or wet a brush with it; contact time is 15 minutes. For fungal contamination, contact time is 20 minutes.

After disinfection, wipe the surface with a cloth or clean cloth and rinse thoroughly with drinking water.

Prepare working solutions in a room equipped with an extraction ventilation system, in clean, tightly sealed plastic containers. Persons preparing working solutions must wear work clothes and eye and skin protection.

Disinfected surfaces that may come into contact with food must be rinsed thoroughly with drinking water.

ADDITIONAL INFORMATION

Hazardous. Causes severe skin burns and eye damage.

Highly toxic to aquatic organisms.

Wear protective gloves/protective clothing/eye (face) protection. IF ON SKIN (or hair): Immediately remove/take off all contaminated clothing. Rinse skin with water or shower.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing eyes.

If unwell, contact POISON CONTROL AND INFORMATION CENTRE or seek medical advice.

Dispose of contents/container as hazardous waste according to national requirements.

Biocidal authorisation certificate No. BSV.10-373.1 (16.5.7.10.14)-A-020304PN0601888-17-88), valid until 2022-04-05.

Use biocidal products safely. Always read the label and product information before use.

COMPOSITION

Active substances: didecyldimethylammonium chloride, CAS No. 7173-51-5, EC No. 230-525-2, 7.5%, alkyl (C12-16) dimethylbenzylammonium chloride, CAS No. 68424-85-1, EC No. 270-325-2, 7.5%. Contains glutamic acid, disodium metasilicate, sodium carbonate, non-ionic surfactants, <5%.

STORAGE CONDITIONS

Store in a dry, clean, protected from direct sunlight and inaccessible to unauthorised persons premises.

Country of origin: Lithuania.

Specifications

Capacity 1 L
Working solution concentration 0.5–1.5 % (5–15 g/l of water)
Contact time 15 min. (20 min. for fungal contamination)
Active substances Didecyldimethylammonium chloride 7.5 %, alkyl (C12-16) dimethylbenzylammonium chloride 7.5 %
Action Bactericidal, fungicidal
Product types 2, 3 and 4
Users Professional users only
Country of origin Lithuania

Frequently asked questions

How do I prepare the working solution?

Depending on the level of contamination, a 0.5–1.5 % solution is prepared – that is 5–15 g of the product per 1 l of water. Prepare the solution in a ventilated room, in a clean, tightly closable plastic container.

How long should the solution be left on the surface?

The contact time is 15 min., or 20 min. for fungal contamination. Dirt must be removed mechanically beforehand.

Do surfaces need rinsing after disinfection?

Yes, after disinfection wipe the surface with a clean cloth and rinse thoroughly with drinking water, especially surfaces that may come into contact with food.

Which microorganisms is the product effective against?

It is bactericidal against Pseudomonas aeruginosa, E. coli, Enterococcus hirae, Staphylococcus aureus, Salmonella Typhimurium and L. monocytogenes, and fungicidal against A. niger.

What protective equipment should be used?

The concentrate causes severe skin burns and eye damage, so wear protective gloves, work clothing and eye or face protection.

Product form

Disinfectant Surface Cleaner Mint, 1 L

SKU: 209469
Barcode: 4770539342273

4,60 €4,10 €-11%

  •  This item is currently out of stock.

Out of stock

  • Easy returns
  • Free delivery
  • Masters discounts

Description

Disinfectant Surface Cleaner Mint, 1 L

A product for cleaning and disinfecting surfaces and equipment in healthcare and public facilities, beauty salons, tanning salons, children's educational institutions and care homes, animal breeding and housing facilities and transport vehicles, food and feed production, catering establishments.

Suitable for cleaning and disinfecting sauna facilities.

Suitable for washing and disinfecting dishes in catering establishments.

Suitable for disinfecting eggs in hatchery setters.

The product inactivates bacteria and acts bactericidally against Pseudomonas aeruginosa, Escherichia coli, Enterococcus hirae, Staphylococcus aureus, Salmonella Typhimurium, L. monocytogenes. The product has fungicidal properties against A. niger.

Suitable for use with foam generators.

Suitable for manual washing application.

The product contains surfactants and therefore has good cleaning properties.

A disinfectant not intended for direct human use; a food and feed sector disinfectant and veterinary hygiene disinfectant (product types 2, 3 and 4). For professional users only.

Must not come into direct contact with food and feed.

USE

The product is suitable for disinfecting and cleaning various moisture-resistant surfaces. Depending on the degree of soiling, working dilutions of 0.5-1.5% (5-15g/l water) are used to clean rooms (floors, walls, doors, windowsills), furniture and all other moisture-resistant surfaces.

For disinfection, a spray can be used, or for soft furnishings and small items, a dense sponge or cloth. First mechanically remove dirt from the surface to be disinfected. Spray the solution onto the surface or wet a brush with it; contact time is 15 minutes. For fungal contamination, contact time is 20 minutes.

After disinfection, wipe the surface with a cloth or clean cloth and rinse thoroughly with drinking water.

Prepare working solutions in a room equipped with an extraction ventilation system, in clean, tightly sealed plastic containers. Persons preparing working solutions must wear work clothes and eye and skin protection.

Disinfected surfaces that may come into contact with food must be rinsed thoroughly with drinking water.

ADDITIONAL INFORMATION

Hazardous. Causes severe skin burns and eye damage.

Highly toxic to aquatic organisms.

Wear protective gloves/protective clothing/eye (face) protection. IF ON SKIN (or hair): Immediately remove/take off all contaminated clothing. Rinse skin with water or shower.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing eyes.

If unwell, contact POISON CONTROL AND INFORMATION CENTRE or seek medical advice.

Dispose of contents/container as hazardous waste according to national requirements.

Biocidal authorisation certificate No. BSV.10-373.1 (16.5.7.10.14)-A-020304PN0601888-17-88), valid until 2022-04-05.

Use biocidal products safely. Always read the label and product information before use.

COMPOSITION

Active substances: didecyldimethylammonium chloride, CAS No. 7173-51-5, EC No. 230-525-2, 7.5%, alkyl (C12-16) dimethylbenzylammonium chloride, CAS No. 68424-85-1, EC No. 270-325-2, 7.5%. Contains glutamic acid, disodium metasilicate, sodium carbonate, non-ionic surfactants, <5%.

STORAGE CONDITIONS

Store in a dry, clean, protected from direct sunlight and inaccessible to unauthorised persons premises.

Country of origin: Lithuania.

Specifications

Capacity 1 L
Working solution concentration 0.5–1.5 % (5–15 g/l of water)
Contact time 15 min. (20 min. for fungal contamination)
Active substances Didecyldimethylammonium chloride 7.5 %, alkyl (C12-16) dimethylbenzylammonium chloride 7.5 %
Action Bactericidal, fungicidal
Product types 2, 3 and 4
Users Professional users only
Country of origin Lithuania

Frequently asked questions

How do I prepare the working solution?

Depending on the level of contamination, a 0.5–1.5 % solution is prepared – that is 5–15 g of the product per 1 l of water. Prepare the solution in a ventilated room, in a clean, tightly closable plastic container.

How long should the solution be left on the surface?

The contact time is 15 min., or 20 min. for fungal contamination. Dirt must be removed mechanically beforehand.

Do surfaces need rinsing after disinfection?

Yes, after disinfection wipe the surface with a clean cloth and rinse thoroughly with drinking water, especially surfaces that may come into contact with food.

Which microorganisms is the product effective against?

It is bactericidal against Pseudomonas aeruginosa, E. coli, Enterococcus hirae, Staphylococcus aureus, Salmonella Typhimurium and L. monocytogenes, and fungicidal against A. niger.

What protective equipment should be used?

The concentrate causes severe skin burns and eye damage, so wear protective gloves, work clothing and eye or face protection.

*Atspalviai ir spalvos nuotraukose gali skirtis nuo spalvų realybėje.

Customer reviews

No reviews yet. Be the first!Reviews can be written by customers who bought this product. Log in

Items viewed

additional information

How long does it take for the goods to be delivered?

The goods in the warehouse and in the store are sent within 1-2 working days after receiving the payment. Other items are shipped within 4-8 business days.

How are the goods delivered?

Parcels are delivered by Omniva and Venipak couriers to the address you specify or to the Omniva, Venipak or LP Express post office specified by you.

Where can I check the status of my order?

Registered customers can monitor order status and order history through their account. After logging in to your account, click "Orders ". Unregistered customers can find all the information by clicking on the link in e-mail. in the "Order Confirmation" letter.

Most popular products

Customer favorites in one place!

More 

More 

Log in

Enter your email – we will send you a one-time code. No password needed.

Log in with email
no account?
Register

Beauty professionals get −10 %, companies get invoices with company details.