Description

GLOW YC57 - a workstation curing solution for manicure and pedicure professionals who need fast, even curing and minimal treatment time. 268 W output and Dual LED technology ensure efficient work with gel polishes, gels and other light-curing products - suitable for busy salons.

Shadow-free curing with Dual LED technology

57 LED diodes with no so-called "dead zone" - light reaches every part of the nail plate, including the side walls and corners. This eliminates uneven curing, which is what brings clients back with chipped polish.

The enclosed chamber design concentrates the light - the nail design is set more precisely and faster than in open lamp designs. Dual LED technology emits light at two wavelengths - 365 nm and 405 nm - so the lamp is compatible with a wide range of products and does not cause excessive eye strain during longer treatments. This manicure and pedicure equipment suits both daily salon work and mobile professionals.

Four timer settings - every product gets the right exposure

The lamp has four preset times: 10 s, 30 s, 60 s and 99 s, counted down on the digital display. The technician chooses the setting for the specific product - avoiding unnecessary curing time and saving time over a day with 8+ clients.

The built-in motion sensor switches the lamp on automatically when fingers are placed under it - if no setting is selected, the maximum curing time is 120 seconds. This speeds up work and reduces the number of button presses during the treatment.

Low Heat Mode - less heat sensation, fewer client complaints

"Low Heat Mode" (the 99 s setting) gradually increases the output during curing - the lamp does not heat up abruptly. This solves a common problem: the heat or burning sensation when curing gels, which makes clients uncomfortable and forces the technician to interrupt the treatment.

This is especially relevant when working with clients with more sensitive skin or using thicker gels - these products react strongly to rapidly rising heat in other lamps on the market.

Removable base plate - quicker switch to pedicure

The easily removable base plate lets the client place a foot under the lamp during pedicure or podology treatments - no need to change lamps or ask the client to change position. The plate is also easy to clean or disinfect between clients, meeting hygiene requirements.

The chrome-finish handle with a polished surface makes the lamp easy to move - suitable for mobile professionals working in several rooms or visiting clients at home. A phone-stand recess in the housing lets the client watch content during the treatment, reducing restlessness and making longer curing feel shorter.

Compact dimensions - fits any workstation

Dimensions of 23.5 × 19.2 × 9.3 cm - the lamp does not take up much space on the desk, yet the interior lets you place a whole hand or foot inside with ease. This ensures even curing of the nail design and reduces the risk of allergies caused by under-cured products.

Power supply 100-240 V (output 24 V) - compatible with electrical grids in Lithuania and other European countries, convenient for mobile technicians working in different locations.

Key features

  • Power: 268 W - fast curing without overheating
  • Number of LED diodes: 57 (no dead zone) - even light distribution
  • Wavelength: 365 nm and 405 nm (Dual LED) - compatible with a wide range of products
  • Timer settings: 10 s, 30 s, 60 s, 99 s (Low Heat Mode) - the right exposure time for every product
  • Motion sensor with automatic start (max. 120 s) - speeds up work, less need for manual operation
  • Digital display - clearly visible timer during the treatment
  • Removable base plate - makes pedicure treatments and cleaning between clients easier
  • Phone-stand recess on the housing - extra comfort for the client
  • Dimensions: 23.5 cm × 19.2 cm × 9.3 cm
  • Power supply: 100-240 V / output 24 V
  • Colour: blue-pink

Read the instructions carefully before use.
What's included: lamp, power supply.

Specifications:
Colour: blue-pink
Timer: 10 s, 30 s, 60 s, 99 s
Maximum working time: 120 s
Motion sensor: yes
Display: digital
Number of LEDs: 57
Power: 268 W
Rated voltage: 100-240 V
Output voltage: 24 V
Wavelength: 365 nm, 405 nm
Dimensions: 23.5 cm × 19.2 cm × 9.3 cm

Frequently asked questions

How long does polish take to cure under the GLOW YC57 RN lamp?

You choose the time to suit the product: the lamp has 10 s, 30 s, 60 s and 99 s settings. If no setting is selected, the motion sensor switches the lamp on automatically, with a maximum curing time of 120 s.

Which products is this lamp compatible with?

Dual LED technology emits light at 365 nm and 405 nm, so the lamp is suitable for gel polishes, gels and other light-curing products. Output is 268 W, with 57 diodes.

Does the lamp get hot when curing gel?

"Low Heat Mode" (99 s) increases the output gradually, so the heat or burning sensation is reduced. This matters when working with thicker gels and clients with more sensitive skin.

Is the lamp suitable for a mobile nail technician?

Yes, it is easy to carry by the chrome-finish handle, and it measures 23.5 × 19.2 × 9.3 cm. The power supply runs on 100-240 V mains, with an output voltage of 24 V.

Product form

GLOW YC57 RN UV/LED nail lamp 268 W, blue-pink

SKU: 203954
Barcode: 5906717457739

22,20 €19,70 €-11%

baltabaltaRN mėlynai rožinėRN mėlynai rožinė

🚚 Estimated delivery time:  

November 17 d. - November 24 d.

🚚 Estimated delivery time:  

November 11 d. - November 12 d.

    729 in stock

    • Easy returns
    • Free delivery
    • Masters discounts

    Description

    GLOW YC57 - a workstation curing solution for manicure and pedicure professionals who need fast, even curing and minimal treatment time. 268 W output and Dual LED technology ensure efficient work with gel polishes, gels and other light-curing products - suitable for busy salons.

    Shadow-free curing with Dual LED technology

    57 LED diodes with no so-called "dead zone" - light reaches every part of the nail plate, including the side walls and corners. This eliminates uneven curing, which is what brings clients back with chipped polish.

    The enclosed chamber design concentrates the light - the nail design is set more precisely and faster than in open lamp designs. Dual LED technology emits light at two wavelengths - 365 nm and 405 nm - so the lamp is compatible with a wide range of products and does not cause excessive eye strain during longer treatments. This manicure and pedicure equipment suits both daily salon work and mobile professionals.

    Four timer settings - every product gets the right exposure

    The lamp has four preset times: 10 s, 30 s, 60 s and 99 s, counted down on the digital display. The technician chooses the setting for the specific product - avoiding unnecessary curing time and saving time over a day with 8+ clients.

    The built-in motion sensor switches the lamp on automatically when fingers are placed under it - if no setting is selected, the maximum curing time is 120 seconds. This speeds up work and reduces the number of button presses during the treatment.

    Low Heat Mode - less heat sensation, fewer client complaints

    "Low Heat Mode" (the 99 s setting) gradually increases the output during curing - the lamp does not heat up abruptly. This solves a common problem: the heat or burning sensation when curing gels, which makes clients uncomfortable and forces the technician to interrupt the treatment.

    This is especially relevant when working with clients with more sensitive skin or using thicker gels - these products react strongly to rapidly rising heat in other lamps on the market.

    Removable base plate - quicker switch to pedicure

    The easily removable base plate lets the client place a foot under the lamp during pedicure or podology treatments - no need to change lamps or ask the client to change position. The plate is also easy to clean or disinfect between clients, meeting hygiene requirements.

    The chrome-finish handle with a polished surface makes the lamp easy to move - suitable for mobile professionals working in several rooms or visiting clients at home. A phone-stand recess in the housing lets the client watch content during the treatment, reducing restlessness and making longer curing feel shorter.

    Compact dimensions - fits any workstation

    Dimensions of 23.5 × 19.2 × 9.3 cm - the lamp does not take up much space on the desk, yet the interior lets you place a whole hand or foot inside with ease. This ensures even curing of the nail design and reduces the risk of allergies caused by under-cured products.

    Power supply 100-240 V (output 24 V) - compatible with electrical grids in Lithuania and other European countries, convenient for mobile technicians working in different locations.

    Key features

    • Power: 268 W - fast curing without overheating
    • Number of LED diodes: 57 (no dead zone) - even light distribution
    • Wavelength: 365 nm and 405 nm (Dual LED) - compatible with a wide range of products
    • Timer settings: 10 s, 30 s, 60 s, 99 s (Low Heat Mode) - the right exposure time for every product
    • Motion sensor with automatic start (max. 120 s) - speeds up work, less need for manual operation
    • Digital display - clearly visible timer during the treatment
    • Removable base plate - makes pedicure treatments and cleaning between clients easier
    • Phone-stand recess on the housing - extra comfort for the client
    • Dimensions: 23.5 cm × 19.2 cm × 9.3 cm
    • Power supply: 100-240 V / output 24 V
    • Colour: blue-pink

    Read the instructions carefully before use.
    What's included: lamp, power supply.

    Specifications:
    Colour: blue-pink
    Timer: 10 s, 30 s, 60 s, 99 s
    Maximum working time: 120 s
    Motion sensor: yes
    Display: digital
    Number of LEDs: 57
    Power: 268 W
    Rated voltage: 100-240 V
    Output voltage: 24 V
    Wavelength: 365 nm, 405 nm
    Dimensions: 23.5 cm × 19.2 cm × 9.3 cm

    Frequently asked questions

    How long does polish take to cure under the GLOW YC57 RN lamp?

    You choose the time to suit the product: the lamp has 10 s, 30 s, 60 s and 99 s settings. If no setting is selected, the motion sensor switches the lamp on automatically, with a maximum curing time of 120 s.

    Which products is this lamp compatible with?

    Dual LED technology emits light at 365 nm and 405 nm, so the lamp is suitable for gel polishes, gels and other light-curing products. Output is 268 W, with 57 diodes.

    Does the lamp get hot when curing gel?

    "Low Heat Mode" (99 s) increases the output gradually, so the heat or burning sensation is reduced. This matters when working with thicker gels and clients with more sensitive skin.

    Is the lamp suitable for a mobile nail technician?

    Yes, it is easy to carry by the chrome-finish handle, and it measures 23.5 × 19.2 × 9.3 cm. The power supply runs on 100-240 V mains, with an output voltage of 24 V.

    *Atspalviai ir spalvos nuotraukose gali skirtis nuo spalvų realybėje.

    Customer reviews

    No reviews yet. Be the first!Reviews can be written by customers who bought this product. Log in

    Items viewed

    additional information

    How long does it take for the goods to be delivered?

    The goods in the warehouse and in the store are sent within 1-2 working days after receiving the payment. Other items are shipped within 4-8 business days.

    How are the goods delivered?

    Parcels are delivered by Omniva and Venipak couriers to the address you specify or to the Omniva, Venipak or LP Express post office specified by you.

    Where can I check the status of my order?

    Registered customers can monitor order status and order history through their account. After logging in to your account, click "Orders ". Unregistered customers can find all the information by clicking on the link in e-mail. in the "Order Confirmation" letter.

    Most popular products

    Customer favorites in one place!

    More 

    More 

    Log in

    Enter your email – we will send you a one-time code. No password needed.

    Log in with email
    no account?
    Register

    Beauty professionals get −10 %, companies get invoices with company details.