Description

HYDRA EVO AUTOCLAVE Steriliser with Printer 15 L, 230V

Automatic steam autoclave designed to sterilise unwrapped instruments. Closure system with operator safety hinge. Thermodynamic cool air lock removal system.

Two sterilisation cycles: 121 °C and 134 °C. Automatic pre-heating, sterilisation cycle and drying phases.

Factory-set non-modifiable cycles
All cycles are factory-preset and guarantee perfect and safe sterilisation of treated materials. Users have no ability to manipulate or modify cycles, protecting against risks from human error.

Pre-set temperature
Our autoclave cycles are set to 134 °C and 121 °C.

134°C cycles are typically used for sterilising hard and metallic materials.

121°C cycles are typically used for sterilising thermoplastic and soft materials.

Water reservoirs
The HYDRA EVO features an internal reservoir for clean water and another for used water. Each tank is fitted with probes to determine minimum and maximum water levels.

Fully automatic cycles
All cycles are fully automatic, with all operations controlled by advanced computer board with powerful microprocessor. Each stage (vacuum, pre-heating, exposure time, drying) is automatically monitored, assisted and managed. No human intervention in cycle control is required.

Door lock
Each door has 2 locks:

Mechanical, which does not open under pressure

Dynamic, operating with special door seal.

Built-in printer
Built-in printer for recording completed cycles.

Safety devices installed
Certified safety valve

Sterilisation chamber PED

Chamber insulation certified with ceramic material

Autoclave controls
Water entry to chamber control

Safety thermostat

Time control

The sterilisation chamber is entirely stainless steel AISI 304. It is heated by a band heating element, ensuring uniform heat. Supplied with four aluminium trays and one tray removal key.

Technical specifications
Stainless steel chamber: Ø 24.5 x 32 cm

External dimensions: 51 x 39 x 59 cm (width x height x depth)

Net weight: 54 kg

2 sterilisation cycles: 121°C and 134°C

Working voltage: 230 V ± 10 % - 50/60 Hz

Power consumption: 1500 W

Class N

Made in Italy

Warranty: 1 year

UNWRAPPED, 121°C CYCLE
Materials: Fragile hard solids rubber hard solids glass turbines, if indicated by manufacturer

Sterilisation time: 35 min.

Maximum load: 4 kg (1 kg load per tray)

Working pressure: 1.2 ÷ 1.3 bar

UNWRAPPED, 134°C CYCLE
Materials: Stainless metal hard materials turbines, if indicated by manufacturer

Sterilisation time: 21 min.

Maximum load: 4 kg (1 kg load per tray)

Working pressure: 2.1 ÷ 2.2 bar

Specifications

Capacity 15 L
Autoclave class N
Sterilisation chamber Stainless steel AISI 304, Ø 24.5 × 32 cm
External dimensions (W × H × D) 51 × 39 × 59 cm
Net weight 54 kg
Sterilisation cycles 121 °C and 134 °C
Sterilisation time 121 °C – 35 min, 134 °C – 21 min
Operating pressure 1.2–1.3 bar (121 °C), 2.1–2.2 bar (134 °C)
Maximum load 4 kg (1 kg on any tray)
Operating voltage 230 V ± 10 %, 50/60 Hz
Power consumption 1500 W
Printer Built-in
What's included 4 aluminium trays, tray removal tool
Country of origin Italy
Warranty 1 year

Frequently asked questions

What instruments can be sterilised?

This is a class N autoclave for unwrapped instruments: the 134 °C cycle is for solid stainless metal materials, the 121 °C cycle for thermoplastic, rubber and glass materials.

Can instruments be sterilised in pouches?

No, the HYDRA EVO is designed for unwrapped instruments. The cycles are factory-set and cannot be changed by the user.

How long does sterilisation take?

The sterilisation time is 35 min for the 121 °C cycle and 21 min for the 134 °C cycle.

How many instruments fit in one cycle?

The maximum load is 4 kg, 1 kg on each of the 4 aluminium trays.

What electrical connection is required?

The autoclave runs on a 230 V ± 10 %, 50/60 Hz mains supply and consumes 1500 W.

Product form

HYDRA EVO AUTOCLAVE Steriliser with Printer 15 L, 230V

SKU: 212617
Barcode: 8023279356601

3 950,00 €3 555,00 €-10%

  •  This item is currently out of stock.

Out of stock

  • Easy returns
  • Free delivery
  • Masters discounts

Description

HYDRA EVO AUTOCLAVE Steriliser with Printer 15 L, 230V

Automatic steam autoclave designed to sterilise unwrapped instruments. Closure system with operator safety hinge. Thermodynamic cool air lock removal system.

Two sterilisation cycles: 121 °C and 134 °C. Automatic pre-heating, sterilisation cycle and drying phases.

Factory-set non-modifiable cycles
All cycles are factory-preset and guarantee perfect and safe sterilisation of treated materials. Users have no ability to manipulate or modify cycles, protecting against risks from human error.

Pre-set temperature
Our autoclave cycles are set to 134 °C and 121 °C.

134°C cycles are typically used for sterilising hard and metallic materials.

121°C cycles are typically used for sterilising thermoplastic and soft materials.

Water reservoirs
The HYDRA EVO features an internal reservoir for clean water and another for used water. Each tank is fitted with probes to determine minimum and maximum water levels.

Fully automatic cycles
All cycles are fully automatic, with all operations controlled by advanced computer board with powerful microprocessor. Each stage (vacuum, pre-heating, exposure time, drying) is automatically monitored, assisted and managed. No human intervention in cycle control is required.

Door lock
Each door has 2 locks:

Mechanical, which does not open under pressure

Dynamic, operating with special door seal.

Built-in printer
Built-in printer for recording completed cycles.

Safety devices installed
Certified safety valve

Sterilisation chamber PED

Chamber insulation certified with ceramic material

Autoclave controls
Water entry to chamber control

Safety thermostat

Time control

The sterilisation chamber is entirely stainless steel AISI 304. It is heated by a band heating element, ensuring uniform heat. Supplied with four aluminium trays and one tray removal key.

Technical specifications
Stainless steel chamber: Ø 24.5 x 32 cm

External dimensions: 51 x 39 x 59 cm (width x height x depth)

Net weight: 54 kg

2 sterilisation cycles: 121°C and 134°C

Working voltage: 230 V ± 10 % - 50/60 Hz

Power consumption: 1500 W

Class N

Made in Italy

Warranty: 1 year

UNWRAPPED, 121°C CYCLE
Materials: Fragile hard solids rubber hard solids glass turbines, if indicated by manufacturer

Sterilisation time: 35 min.

Maximum load: 4 kg (1 kg load per tray)

Working pressure: 1.2 ÷ 1.3 bar

UNWRAPPED, 134°C CYCLE
Materials: Stainless metal hard materials turbines, if indicated by manufacturer

Sterilisation time: 21 min.

Maximum load: 4 kg (1 kg load per tray)

Working pressure: 2.1 ÷ 2.2 bar

Specifications

Capacity 15 L
Autoclave class N
Sterilisation chamber Stainless steel AISI 304, Ø 24.5 × 32 cm
External dimensions (W × H × D) 51 × 39 × 59 cm
Net weight 54 kg
Sterilisation cycles 121 °C and 134 °C
Sterilisation time 121 °C – 35 min, 134 °C – 21 min
Operating pressure 1.2–1.3 bar (121 °C), 2.1–2.2 bar (134 °C)
Maximum load 4 kg (1 kg on any tray)
Operating voltage 230 V ± 10 %, 50/60 Hz
Power consumption 1500 W
Printer Built-in
What's included 4 aluminium trays, tray removal tool
Country of origin Italy
Warranty 1 year

Frequently asked questions

What instruments can be sterilised?

This is a class N autoclave for unwrapped instruments: the 134 °C cycle is for solid stainless metal materials, the 121 °C cycle for thermoplastic, rubber and glass materials.

Can instruments be sterilised in pouches?

No, the HYDRA EVO is designed for unwrapped instruments. The cycles are factory-set and cannot be changed by the user.

How long does sterilisation take?

The sterilisation time is 35 min for the 121 °C cycle and 21 min for the 134 °C cycle.

How many instruments fit in one cycle?

The maximum load is 4 kg, 1 kg on each of the 4 aluminium trays.

What electrical connection is required?

The autoclave runs on a 230 V ± 10 %, 50/60 Hz mains supply and consumes 1500 W.

*Atspalviai ir spalvos nuotraukose gali skirtis nuo spalvų realybėje.

Customer reviews

No reviews yet. Be the first!Reviews can be written by customers who bought this product. Log in

Items viewed

additional information

How long does it take for the goods to be delivered?

The goods in the warehouse and in the store are sent within 1-2 working days after receiving the payment. Other items are shipped within 4-8 business days.

How are the goods delivered?

Parcels are delivered by Omniva and Venipak couriers to the address you specify or to the Omniva, Venipak or LP Express post office specified by you.

Where can I check the status of my order?

Registered customers can monitor order status and order history through their account. After logging in to your account, click "Orders ". Unregistered customers can find all the information by clicking on the link in e-mail. in the "Order Confirmation" letter.

Most popular products

Customer favorites in one place!

More 

More 

Log in

Enter your email – we will send you a one-time code. No password needed.

Log in with email
no account?
Register

Beauty professionals get −10 %, companies get invoices with company details.