Description

omi al-101 ​​clippers are manufactured with a specially designed jaw16 / 6mm jaw to facilitate cutting the nail trough and removing cuticles. equipped with a single spring, satin finish with polished elements.
omi offers the best quality of its products through the introduction of the latest technology, materials (Japanese cobalt steel) and skillful workmanship by highly experienced craftsmen.
Omi's uniqueness lies in its durability and sharpness, which ensures it cuts anywhere on the blade without tearing or damaging the skin. this advantage gives greater efficiency and comfort of work.
omi by nghia made in vietnam
tool suitable for autoclaving and disinfection in chemical decomposition *

* autoclave - basic sterilization temperature 121 ° C for 15 minutes, deactivation temperature 132-134 ° C, pressure 3 bar
attention !!! 
steel, even stainless steel, regardless of the manufacturer, may under special conditions be damaged, destroyed, which may result in discoloration, pitting and even corrosion.

* chemical disinfection - with a liquid intended for this purpose, used according to manufacturer's recommendations. 
attention !!!
not following the manufacturer's recommendations (too strong a solution, too long disinfection time) may cause the metal to react, causing discoloration and damage to the tool

Frequently asked questions

What does the 16/6 mm marking mean?

It is the jaw (JAW) parameter – 16/6 mm. This jaw is designed for precise trimming of the nail bed area and removing cuticles.

Are the nippers suitable for both manicure and pedicure?

Yes, they are designed for both treatments.

How should the nippers be sterilised?

In an autoclave – 121 °C for 15 min; for deactivation – 132–134 °C, 3 bar. For chemical disinfection use a suitable liquid according to its manufacturer's recommendations.

What material are they made of?

Japanese cobalt steel, with a satin finish and polished details. A single spring ensures even closing.

Product form

Omi pro-line clippers al-101 ​​acrylic nail nippers jaw16 / 6mm lap joint

SKU: 200256
Barcode: 8936000915322

24,50 €20,80 €-15%

nagų žnyplės AL-201, 16/6 mmnagų žnyplės AL-201, 16/6 mmnagų žnyplės AL-101, 16/6 mm.nagų žnyplės AL-101, 16/6 mm.nagų žnyplutės AB-101, 16/6 mmnagų žnyplutės AB-101, 16/6 mmžnyplutės nagams NL-103žnyplutės nagams NL-103žnyplutės nagams NB-103žnyplutės nagams NB-103

🚚 Estimated delivery time:  

November 13 d. - November 20 d.

🚚 Estimated delivery time:  

November 09 d. - November 10 d.

    197 in stock Atsiėmimas parduotuvėje per 24 val.  You can pick up or purchase the product at the address Kauno g. 17, Vilnius. Usually ready within 24 hours. When ready, we will inform you by e-mail. by letter

    • Easy returns
    • Free delivery
    • Masters discounts

    Description

    omi al-101 ​​clippers are manufactured with a specially designed jaw16 / 6mm jaw to facilitate cutting the nail trough and removing cuticles. equipped with a single spring, satin finish with polished elements.
    omi offers the best quality of its products through the introduction of the latest technology, materials (Japanese cobalt steel) and skillful workmanship by highly experienced craftsmen.
    Omi's uniqueness lies in its durability and sharpness, which ensures it cuts anywhere on the blade without tearing or damaging the skin. this advantage gives greater efficiency and comfort of work.
    omi by nghia made in vietnam
    tool suitable for autoclaving and disinfection in chemical decomposition *

    * autoclave - basic sterilization temperature 121 ° C for 15 minutes, deactivation temperature 132-134 ° C, pressure 3 bar
    attention !!! 
    steel, even stainless steel, regardless of the manufacturer, may under special conditions be damaged, destroyed, which may result in discoloration, pitting and even corrosion.

    * chemical disinfection - with a liquid intended for this purpose, used according to manufacturer's recommendations. 
    attention !!!
    not following the manufacturer's recommendations (too strong a solution, too long disinfection time) may cause the metal to react, causing discoloration and damage to the tool

    Frequently asked questions

    What does the 16/6 mm marking mean?

    It is the jaw (JAW) parameter – 16/6 mm. This jaw is designed for precise trimming of the nail bed area and removing cuticles.

    Are the nippers suitable for both manicure and pedicure?

    Yes, they are designed for both treatments.

    How should the nippers be sterilised?

    In an autoclave – 121 °C for 15 min; for deactivation – 132–134 °C, 3 bar. For chemical disinfection use a suitable liquid according to its manufacturer's recommendations.

    What material are they made of?

    Japanese cobalt steel, with a satin finish and polished details. A single spring ensures even closing.

    *Atspalviai ir spalvos nuotraukose gali skirtis nuo spalvų realybėje.

    Customer reviews

    No reviews yet. Be the first!Reviews can be written by customers who bought this product. Log in

    Items viewed

    additional information

    How long does it take for the goods to be delivered?

    The goods in the warehouse and in the store are sent within 1-2 working days after receiving the payment. Other items are shipped within 4-8 business days.

    How are the goods delivered?

    Parcels are delivered by Omniva and Venipak couriers to the address you specify or to the Omniva, Venipak or LP Express post office specified by you.

    Where can I check the status of my order?

    Registered customers can monitor order status and order history through their account. After logging in to your account, click "Orders ". Unregistered customers can find all the information by clicking on the link in e-mail. in the "Order Confirmation" letter.

    Most popular products

    Customer favorites in one place!

    More 

    More 

    Log in

    Enter your email – we will send you a one-time code. No password needed.

    Log in with email
    no account?
    Register

    Beauty professionals get −10 %, companies get invoices with company details.