Description
TOUCH BUILDER GEL – a three-phase camouflage builder gel
Touch Builder Gel is a camouflage, three-phase builder gel renowned for its self-levelling properties. Its consistency allows for easy application, holds the arch beautifully and does not shrink on the nail. Ideal for sculpting, strengthening, length restoration and nail extension using forms or the Dual Form technique.
Benefits:
- Medium thickness consistency, leaning towards the thicker side
- High strength and hardness
- Easy to apply and quick to work with
- Does not burn under the lamp
- Does not crack or chip
- Holds the arch beautifully, does not shrink even on long nails
- Can be pressed after 15 seconds
- Medium pigmentation – conceals nail imperfections
- Suitable for strengthening, extension, repair and 3D designs
Application method:
- Lightly file the nail surface with a 180 grit file.
- Degrease the nail plate.
- Apply dehydrator.
- Apply Ultrabond / primer with an almost dry brush – avoid contact with skin.
- Apply a thin layer of Rubber Base as a base coat.
- Cure for 60 seconds under the lamp.
- Remove the sticky layer from the base.
- Perform nail extension or strengthening with Touch Builder Gel.
Technical properties and tips:
When strengthening, it is important to fill the underside of the nail (the natural nail from inside). Complete the final shaping after the gel has set.
For strengthening: gel thickness in the centre – 0.5–0.7 mm
For extension: 1 mm distance from the cuticle, tip thickness – 1 mm, free edge – 0.7–1 mm
Curing time:
LED 48 W lamp: 60–120 seconds
Ingredients (INCI):
Acrylates Copolymer, Isobornyl Methacrylate, Silica, Hydroxycyclohexyl Phenyl Ketone. May contain: CI 77891, CI 14700, CI 47000, CI 42090, CI 60730, CI 15510, CI 77499.
Responsible person: Tiwatiwacom SIA Dzervju iela 6, Riga, LV-1019, Latvia.
Shelf life: 2 years
Shelf life after opening: 12 months
Batch number: see on packaging
Precautions:
- For professionals only
- Keep away from children
- Avoid contact with eyes
- May cause allergic reaction
- If any allergic reaction occurs, discontinue use immediately
Specifications
| Capacity |
30 ml |
| Colour |
Baby Pink |
| Type |
Three-phase builder gel, camouflage gel |
| Consistency |
Medium viscosity, leaning towards thicker |
| Curing time |
60–120 s in a 48 W LED lamp |
| Shelf life |
2 years; after opening – 12 months |
Frequently asked questions
How long does TOUCH Builder Gel Baby Pink take to cure in the lamp?
In a 48 W LED lamp, the gel cures in 60–120 seconds. It does not cause a heat spike in the lamp.
Is the Baby Pink gel suitable for nail extensions on forms?
Yes, the gel is intended for extensions on forms or with the Dual Form technique, as well as for strengthening, length restoration, repairs and 3D designs. It holds the arch and does not shrink, even on long nails.
How thick should the layer be for strengthening and extensions?
For strengthening, the gel thickness at the centre of the nail is 0.5–0.7 mm. For extensions, leave a 1 mm gap from the cuticles; the apex thickness is 1 mm and the free edge 0.7–1 mm.
Does the gel conceal nail plate imperfections?
The gel is a camouflage gel with medium pigmentation, so it masks nail plate imperfections.
What base should be used under TOUCH Builder Gel?
Buff the nail with a 180 grit file, degrease, and apply dehydrator and Ultrabond/primer. Then apply a thin layer of Rubber Base, cure for 60 seconds and remove the sticky layer.