Description

Large capacity ultrasonic bath designed for the daily requirements of cosmetic and medical clinics handling significant volumes of instruments.

The BS-UC15 is intended for cleaning and disinfecting cosmetic and medical instruments: microdermabasion handpieces, burs, dental and cosmetic attachments. The ultrasonic bath reaches difficult-to-access areas – particularly important for small instruments with grooved or textured surfaces that are ineffective to clean by hand. Unlike mechanical cleaning, ultrasonic technology does not damage the surface of cleaned instruments, thereby extending their service life.

A 40 kHz frequency combined with a liquid heating function (up to 80 °C) ensures precise removal of even the finest contaminants – such cleaning effectiveness cannot be achieved in baths without heating capability. 360 W ultrasonic power and 400 W heating power (760 W total) allow rapid reaching of working temperature and maintenance throughout the cleaning cycle without interruption.

Key Features

  • 15 L capacity – accommodates large instrument quantities in one cycle, reducing the number of cleaning cycles throughout the day
  • 360 W ultrasonic power and 400 W heating power – effective cleaning even for complex profile instruments
  • Temperature adjustment 0–80 °C – adaptable to different cleaning solution and instrument type requirements
  • Working time 1–30 minutes – easy programme selection according to contamination level, no manual monitoring required
  • 40 kHz frequency – reaches difficult-to-access areas without mechanical contact, does not cause instrument surface damage
  • Electronic control panel – clear working parameter control, suitable for both experienced specialists and new staff
  • Stainless steel construction – resistant to cleaning solutions, easy to clean, meets hygiene standards

Technical Specifications

Capacity15 L
Ultrasonic Power360 W
Heating Power400 W
Total Power760 W
Frequency40 kHz
Working Time1–30 min
Temperature Adjustment0–80 °C
Bath Length330 mm
Bath Width300 mm
Bath Height150 mm
Unit Length355 mm
Unit Width330 mm
Unit Height280 mm
Carton Dimensions480×430×440 mm
ConstructionStainless Steel

The 15 L capacity and 330×300×150 mm bath dimensions allow cleaning large instrument quantities in one cycle – particularly important for salons with 8+ client flow per day, where instrument disinfection must occur quickly between procedures. The stainless steel housing (355×330×280 mm) ensures durability and complies with hygiene standards for medical and cosmetic clinics.

Frequently asked questions

What cleaning fluid should I use in the BS-UC15 ultrasonic bath?

No specific fluid is stated in the description, so choose one according to the type of instruments being cleaned and the fluid manufacturer's recommendations. The temperature can be set from 0 to 80 °C, and the stainless steel tank is resistant to cleaning fluids.

Is this bath suitable for cleaning parts?

The manufacturer intends it for cosmetology and medical instruments: microdermabrasion heads, drill bits and dental attachments. The tank is 330 × 300 × 150 mm with a capacity of 15 L, so many small items fit in one cycle.

How long does one cleaning cycle take?

Working time is set from 1 to 30 minutes on the electronic control panel, so the cycle can be matched to the level of soiling and does not need to be monitored manually.

What are the power and frequency of the bath?

Ultrasonic power 360 W, heating power 400 W, total power 760 W. Operating frequency 40 kHz.

How much space does the unit take up?

Housing dimensions are 355 × 330 × 280 mm, carton dimensions 480 × 430 × 440 mm. According to the supplier, the weight with packaging is 9.25 kg.

Product form

Ultrasonic Bath BS-UC15, 15 litres

SKU: 218770
Barcode: 5906508743393

368,00 €324,00 €-12%

🚚 Estimated delivery time:  

November 13 d. - November 20 d.

🚚 Estimated delivery time:  

November 09 d. - November 10 d.

    4 in stock

    • Easy returns
    • Free delivery
    • Masters discounts

    Description

    Large capacity ultrasonic bath designed for the daily requirements of cosmetic and medical clinics handling significant volumes of instruments.

    The BS-UC15 is intended for cleaning and disinfecting cosmetic and medical instruments: microdermabasion handpieces, burs, dental and cosmetic attachments. The ultrasonic bath reaches difficult-to-access areas – particularly important for small instruments with grooved or textured surfaces that are ineffective to clean by hand. Unlike mechanical cleaning, ultrasonic technology does not damage the surface of cleaned instruments, thereby extending their service life.

    A 40 kHz frequency combined with a liquid heating function (up to 80 °C) ensures precise removal of even the finest contaminants – such cleaning effectiveness cannot be achieved in baths without heating capability. 360 W ultrasonic power and 400 W heating power (760 W total) allow rapid reaching of working temperature and maintenance throughout the cleaning cycle without interruption.

    Key Features

    • 15 L capacity – accommodates large instrument quantities in one cycle, reducing the number of cleaning cycles throughout the day
    • 360 W ultrasonic power and 400 W heating power – effective cleaning even for complex profile instruments
    • Temperature adjustment 0–80 °C – adaptable to different cleaning solution and instrument type requirements
    • Working time 1–30 minutes – easy programme selection according to contamination level, no manual monitoring required
    • 40 kHz frequency – reaches difficult-to-access areas without mechanical contact, does not cause instrument surface damage
    • Electronic control panel – clear working parameter control, suitable for both experienced specialists and new staff
    • Stainless steel construction – resistant to cleaning solutions, easy to clean, meets hygiene standards

    Technical Specifications

    Capacity15 L
    Ultrasonic Power360 W
    Heating Power400 W
    Total Power760 W
    Frequency40 kHz
    Working Time1–30 min
    Temperature Adjustment0–80 °C
    Bath Length330 mm
    Bath Width300 mm
    Bath Height150 mm
    Unit Length355 mm
    Unit Width330 mm
    Unit Height280 mm
    Carton Dimensions480×430×440 mm
    ConstructionStainless Steel

    The 15 L capacity and 330×300×150 mm bath dimensions allow cleaning large instrument quantities in one cycle – particularly important for salons with 8+ client flow per day, where instrument disinfection must occur quickly between procedures. The stainless steel housing (355×330×280 mm) ensures durability and complies with hygiene standards for medical and cosmetic clinics.

    Frequently asked questions

    What cleaning fluid should I use in the BS-UC15 ultrasonic bath?

    No specific fluid is stated in the description, so choose one according to the type of instruments being cleaned and the fluid manufacturer's recommendations. The temperature can be set from 0 to 80 °C, and the stainless steel tank is resistant to cleaning fluids.

    Is this bath suitable for cleaning parts?

    The manufacturer intends it for cosmetology and medical instruments: microdermabrasion heads, drill bits and dental attachments. The tank is 330 × 300 × 150 mm with a capacity of 15 L, so many small items fit in one cycle.

    How long does one cleaning cycle take?

    Working time is set from 1 to 30 minutes on the electronic control panel, so the cycle can be matched to the level of soiling and does not need to be monitored manually.

    What are the power and frequency of the bath?

    Ultrasonic power 360 W, heating power 400 W, total power 760 W. Operating frequency 40 kHz.

    How much space does the unit take up?

    Housing dimensions are 355 × 330 × 280 mm, carton dimensions 480 × 430 × 440 mm. According to the supplier, the weight with packaging is 9.25 kg.

    *Atspalviai ir spalvos nuotraukose gali skirtis nuo spalvų realybėje.

    Customer reviews

    No reviews yet. Be the first!Reviews can be written by customers who bought this product. Log in

    Items viewed

    additional information

    How long does it take for the goods to be delivered?

    The goods in the warehouse and in the store are sent within 1-2 working days after receiving the payment. Other items are shipped within 4-8 business days.

    How are the goods delivered?

    Parcels are delivered by Omniva and Venipak couriers to the address you specify or to the Omniva, Venipak or LP Express post office specified by you.

    Where can I check the status of my order?

    Registered customers can monitor order status and order history through their account. After logging in to your account, click "Orders ". Unregistered customers can find all the information by clicking on the link in e-mail. in the "Order Confirmation" letter.

    Most popular products

    Customer favorites in one place!

    More 

    More 

    Log in

    Enter your email – we will send you a one-time code. No password needed.

    Log in with email
    no account?
    Register

    Beauty professionals get −10 %, companies get invoices with company details.